Table of Contents
Advertisement
11
Selecting the seam types
.02.01
For better information during programming and sewing, it is possible to show a diagram of dif-
ferent seam types. To do so, the seam types must be allocated to the seam programs. With
the exception of the free seam, for each seam type the number of seam sections and the
starting point is set. The functions and values in the individual seam sections can be altered.
The seam types are divided into groups for flaps, cuffs, collars and shoulder flaps. In
additions, one free description space is available, if it is not possible to select a pre-assigned
work step from one of the groups. The group currently activated is shown by an inverse
symbol.
Switch on the machine.
Select a program number, see Chapter 9.11 Selecting a seam program.
Call up the seam program input function.
Call up the seam type selection menu.
3
Select the desired seam group.
12
3
0
2.0
0.0
Input
11 - 4
Advertisement
Table of Contents
