Table of Contents
Advertisement
Sewing
10
Sewing
In the sewing mode a difference must be made between manual sewing and programmed
sewing. In the manual sewing mode, in addition to the functions such as edge guide, stitch
length, seam securing, needle functions, presser foot functions and seam end conditions, the
parameter for securing seams are also displayed and can be altered directly. The current
seam securing parameters also apply in programmed sewing. The change from programmed
to manual sewing and vice versa is effected with the program number selection function.
10
Manual sewing
.01
In the manual sewing mode all the parameters necessary for the sewing operation can be
changed directly. The manual sewing mode is selected with the program number selection
function, see Chapter 9.11 Selecting the seam program. The selection of the manual
sewing mode is shown by the symbol of a hand on the display instead of the program
number.
Explanation of the functions
Seam program selection
Opens the seam program number input menu or the menu for selecting manual sewing, see
Chapter 9.11 Selecting the seam program.
Edge guide position
Opens the menu for entering the seam depth, see Chapter 9.07 Entering the edge guide
position.
Stitch length
Opens the menu for entering the stitch length, see Chapter 9.06 Entering the stitch length.
10 - 1
Switch on the machine.
Select the manual sewing mode, see Chapter 9.11 Selecting the seam program.
Advertisement
Table of Contents
