Mitsubishi Electric MELSERVO-JE Instruction Manual page 19

1. SERVO AMPLIFIER TROUBLESHOOTING
Alarm No.: 14 Name: Control process error
Alarm content
Detail
Detail name
No.
14.1 Control (1) The parameter setting is
process error 1
(2) Something near the
(3) The servo amplifier is
14.2 Control (1) The parameter setting is
process error 2
(2) Something near the
(3) The servo amplifier is
14.3 Control process Check it with the check method for [AL. 14.1].
error 3
14.4 Control process
error 4
14.5 Control process
error 5
14.6 Control process
error 6
14.7 Control process
error 7
14.8 Control process
error 8
14.9 Control process
error 9
14.A Control process
error 10
14.C Control process (1) Something near the
error 12
(2) The servo amplifier is
14.D Control process Check it with the check method for [AL. 14.C].
error 13
The process did not complete within the specified time.
[C]: A part (communication IC) in the servo amplifier is failure.
Cause
Check if the parameter
incorrect. setting is incorrect.
Check the power
device caused it. supply for noise.
Check if the connector
is shorted.
Replace the servo
malfunctioning. amplifier, and then
check the
repeatability.
Check if the parameter
incorrect. setting is incorrect.
Check the power
device caused it. supply for noise.
Check if the connector
is shorted.
Replace the servo
malfunctioning. amplifier, and then
check the
repeatability.
Check the power
device caused it. supply for noise.
Check if the connector
is shorted.
Replace the servo
malfunctioning. amplifier, and then
check the
repeatability.
Check method Check result
It is incorrect.
It is correct.
It has a failure.
It has no failure.
It is not repeatable.
It is incorrect.
It is correct.
It has a failure.
It has no failure.
It is not repeatable.
It has a failure.
It has no failure.
It is not repeatable.
1 - 12
Action Target
Set it correctly. [A]
[B]
Check (2).
[C]
Take
countermeasures
against its cause.
Check (3).
Replace the servo
amplifier.
Set it correctly.
Check (2).
Take
countermeasures
against its cause.
Check (3).
Replace the servo
amplifier.
Take [C]
countermeasures
against its cause.
Check (2).
Replace the servo
amplifier.