Mounting The Blu-Da - BSS Audio Soundweb London BLU-DA Installation Manual

2

Mounting The BLU-DA

Rack Mounting
To rack mount the BLU-DA, first affix the rack ears (included) to both sides of the BLU-DA using four screws
(included) per side� The BLU-DA can then be installed into a standard 1U rack space using four rack screws and
washers (included)�
When installing the BLU-DA into a rack, it is recommended that one empty rack space is left above and below
the device� This allows heat to safely dissipate� Furthermore, DO NOT attempt to install two BLU-DA devices
side-by-side into the same 1U rack space – doing so will prevent heat from safely dissipating� See the below
diagram for further clarification.
Rack mount ears
BLU-DA devices
Empty Space
Empty Space
Empty Space
Empty Space
Empty Space