Philips sonicare flexcare platinum User Manual page 14

ENGLISH
14
1 Place the handle with a brush head attached on the plugged-in
charger or sanitiser.
2 Press and hold the mode button for 2 seconds.
You hear 1 beep to indicate the Quadpacer has been deactivated.
,
You hear 2 beeps to indicate the Quadpacer has been activated.
,
Smartimer
The Smartimer indicates that your brushing cycle is complete when it
automatically switches off the toothbrush at the end of the brushing cycle.
Dental professionals recommend brushing at least 2 minutes twice a day.
Easy-start
The Easy-start feature gently increases power over the first 14 brushings
to ease into the Sonicare experience. The Easy-start feature only works
in the Clean mode and at the High intensity level.
This Sonicare type comes with the Easy-start feature deactivated.
To activate or deactivate the Easy-start feature:
1 Attach your brush head to the handle.
2 Place the handle on the plugged-in charger or sanitiser.
3 Activate or deactivate Easy-start:
To activate Easy-start: Press and hold the power on/off button for
,
2 seconds. You hear 2 beeps to indicate that the Easy-start feature
has been activated.
To deactivate Easy-start: Press and hold the power on/off button
,
for 2 seconds. You hear 1 beep to indicate that the Easy-start
feature has been deactivated.
Note: Each of the first 14 brushings must be at least 1 minute in length to
properly move through the Easy-start ramp-up cycle.
Note: Using the Easy-start feature beyond the initial ramp-up period is not
recommended and reduces Sonicare's effectiveness in removing plaque.