Advertisement
Recording Video
1. In real-time monitoring mode, press the
button to begin
recording.
2. Press again to stop recording.
NOTICE!
The video will be automatically saved as an individual file every 3
minutes. "Memory Full" appears on the LCD screen indicates that the
SD card memory is full.
Taking Photos
1. In real-time monitoring mode, press the
button to take a
photo.
NOTICE!
"Memory Full" appears on the LCD screen indicates that the SD card
memory is full.
Playback Video/Picture
1. In realtime monitoring mode, press button.
2. Press or button to select folder, then press OK button to
enter it.
3. For playback video, press or button to select video, then press
OK button to play.
Pause: Press OK button in playing status to pause; press again to
resume.
View Pictures: Press or button to select picture, press OK button
to view picture.press again to resume.
Exit: Press MENU button.
6
Delete Video/Picture
1. In real-time monitoring staus, press button.
2. Press or button to select video or picture, then press OK
button.
3. Press or button to select the file, and then press OK button.
4. Press or button to select the YES and NO, that is, to cancel
or delete. Once you have yellow highlighted your selection, press the
OK button.
How to enter the Setting Mode
In real-time monitoring mode, press the MENU button.
Language Setting
1. In the setting mode, press or button to select 'SYSTEM
SETTING', and then press OK button.
2. Press or button to select 'LANGUAGE', and then press OK
button, the following interface will appear.
3. Press or button to select your desired language.
4. Press OK button to confirm and MENU button to exit.
Format
1. In the setting mode, press or button to select 'SYSTEM
SETTING', and then press OK button.
2. Press or button to select 'FORMAT', and then press OK
button.
7
3. Press or button to select between YES and NO, that is to
format or cancel. Once you have highlighted your selection, press the
OK button.
Default Setup
1. In the setting mode, press or button to select 'SYSTEM
SETTING', and then press OK button.
2. Press or button to select 'DEFAULT SETUP', and then press
OK button.
3. Press or button to select between YES and NO, that is to
restore default or cancel to confirm and press the MENU button to
exit. Press the OK button.
View Version Information
1. In the setting mode, press or button to select 'SYSTEM
SETTING', and then press OK button.
2. Press or button to select 'VERSION', and then press OK
button. You will now be able to view the version details of this product.
Date/Time Setting
1. In the setting mode, press or button to select 'DATE/TIME',
and then press OK button.
2. Press OK button to select date or time, press or button to
adjust selection, press MENU button to confirm and exit.
Frame Rate Setting
1. In the setting mode, press or button to select 'RECORDER
SETTING', and then press OK button.
2. Press or button to select suitable frame rate. Press OK button
to confirm and exit.
Event Playback
1. In the setting mode, press or button to select 'EVENT
PLAYBACK', and then press OK button.
8
2. For other operation, see "PLAY VIDEO/PICTURE" and "DELETE VIDEO/
PICTURE" section.
Specifications
Imaging Sensor
CMOS
Horizontal Viewing Angle
48 Degrees
Minimum Illumination
0 Lux
Power Supply
4 x AA batteries
Tube Diameter
8mm
Waterproof Capacity
IP67 (for lens/tube only)
LCD Screen Type
2.31" TFT-LCD
Effective Pixels
640 x 480
Video System
NTSC
Consumption Current (Max.)
370mA
Dimensions (H x W x D)
9.84"H x 3.46"W x 1.77"D
Approx. Weight
445g/15.7 oz
Operating Temperature
-10 C~50 C/14 F~122 F
Operating Humidity (Max.)
15~85%RH
All specifications are subject to minor change without prior notice.
FCC Information
FCC ID: TW5GB8863
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference,
(2) this device must accept any interference received, including interference
that may cause undesired operation.
IMPORTANT: FCC requirements state that changes or modifications not
expressly approved by Whistler could void the user's authority to operate the
equipment.
9
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician
for help.
10
Advertisement
