Anti-Tip Dimensions (36") - Viking VBI7360 Installation Manual

Anti-Tip Dimensions
C
Cabinet
Opening
C
Dimension A = Cabinet opening minus the refrigerator height + 1-1/4" (3.2 cm)
(Bottom-Freezer)
WARNING
TIP OVER HAZARD
Appliance is top heavy and tips easily when not
completely installed. To avoid a hazard due to instability
of the appliance, it must be installed according to the
instructions including the anti-tip bracket
Anti-tip Bracket
There are 12 hole locations on the anti-tip
bracket. Of those 12, at least 4 places must
be used.
NOTE: Number of fasteners must be
suitable for load in order to prevent tipping.
Floor
A
8
8
Cabinet
Rear