Boot Settings - Supermicro SUPERSERVER User Manual

S S
UPER ERVER 7048R-C1RT/7048R-C1R User's Manual
7-7

Boot Settings

This submenu allows the user to configure Boot settings for this system:
Boot Configuration
Boot Mode Select
Use this item to select the type of device to be used for system boot. The options
are Legacy, UEFI, and Dual.
Fixed Boot Order Priorities
This option prioritizes the order of bootable devices from which the system will boot.
Press <Enter> on each entry from top to bottom to select devices.
When the item above -"Boot Mode Select" is set to Dual (default), the following
items will be displayed for configuration:
•
Boot Option #1 - Boot Option #15
When the item above -"Boot Mode Select" is set to Legacy, the following items will
be display for configuration:
•
Boot Option #1 - Boot Option #7
When the item above -"Boot Mode Select" is set to UEFI, the following items will
be display for configuration:
•
Boot Option #1 - Boot Option #8
 Delete Boot Option
Use this item to select a boot device to delete from the boot priority list.
7-44
Delete Boot Option
Select the target boot device to delete from the boot priority list.
 Delete Driver Option
Use this item to select a driver to delete from the boot priority list.
Delete Boot Option
Select the target boot drive to delete from the boot priority list.
 Hard Disk Drive BBS Priorities
•
Boot Option #1
 Network Drive BBS Priorities
•
Boot Option #1
 UEFI Application Boot Priorities
•
UEFI Boot Option #1
7-45
Chapter 7: BIOS