Valve Clearance; Tires - Yamaha MT-10 Owner's Manual

Valve clearance

The valve clearance changes with use,
resulting in improper air-fuel mixture
and/or engine noise. To prevent this
from occurring, the valve clearance
must be adjusted by a Yamaha dealer
at the intervals specified in the periodic
maintenance and lubrication chart.
Periodic maintenance and adjustment
EAU21402

Tires

Tires are the only contact between the
vehicle and the road. Safety in all con-
ditions of riding depends on a relatively
small area of road contact. Therefore, it
is essential to maintain the tires in good
condition at all times and replace them
at the appropriate time with the speci-
fied tires.
Tire air pressure
The tire air pressure should be checked
and, if necessary, adjusted before each
ride.
WARNING

Operation of this vehicle with
improper tire air pressure may
cause severe injury or death
from loss of control.

The tire air pressure must be
checked and adjusted on cold
tires (i.e., when the temperature
of the tires equals the ambient
temperature).
EAU70961
Never overload your vehicle. Opera-
tion of an overloaded vehicle could
cause an accident.
EWA18370
Tire inspection
1. Tire sidewall
2. Tire tread depth
8-18
Cold tire air pressure:
Front:
250 kPa (2.50 kgf/cm
Rear:
290 kPa (2.90 kgf/cm
Maximum load*:
170 kg (375 lb)
* Total weight of rider, passenger, car-
go and accessories
WARNING
1
2
, 36 psi)
2
2
, 42 psi)
3
4
EWA10512
5
6
7
8
9
10
11
12