Set Locks And Timers - Philips HFL3117Z User Manual

Set locks and timers

Clock
You can display a clock on the TV.
The clock displays the time that is
broadcast by your TV service
operator.
Display the TV clock
1. While you watch TV, press INFO.
The clock is displayed at the top
right-hand corner of the TV screen.
Change the clock mode (for
Australia only)
You can change the clock mode to
automatic or manual. By default, it is
set to automatic mode, which
automatically synchronises it to
Coordinated Universal Time (UTC). If
your TV cannot receive UTC
transmissions, set the clock
manually.
1. While you watch TV, press MENU.
2. Select [Setup], then press OK.
3. Select [Other Settings] > [Time
Zone].
4. Select [Auto] or select the time
zone based on GMT.
Sleep timer
You can switch the TV to standby
after a specified time.
1. Press MENU.
2. Select [Timer], then press OK.
3. Select [Off Timer], then select the
sleep timer duration.
After the specified time, the TV
switches to standby.
Tip: The sleep timer can be set up to
90 minutes. To switch off the sleep
timer, select [Off].
Auto standby
Auto switch off: To conserve energy,
set the TV to switch off
automatically after a period of
inactivity.
1. Press MENU.
2. Select [Timer], then press OK.
3. Select [Auto Standby], then select
the period of time.
Child lock
To protect children from unsuitable
TV programmes, you can lock the TV
or block age rated programmes.
Set or change the child lock code
1. Press MENU.
2. Select [Setup], then press OK.
3. Select [Child Lock], then press OK.
4. Enter the code with the Numeric
buttons.
If you access the child lock menu for
the first time, enter '0000'.
5. Select [Change PIN].
6. Enter the child lock code with the
Numeric buttons.
Tip: If you forget your code, enter
'5351' to override any existing
codes. Make sure that the Contrast,
Brightness, Colour and Sharpness
values in the picture setting are set
to 100.
EN 19