Table of Contents
Advertisement
2 Use your TV
Watch TV
Switch TV on or off
Switch the TV on
Connect the TV to the mains
•
outlet and switch on the main
power.
If the TV is not switched on, press
•
on the remote control or on
the rear panel of the TV.
Note: There is a short delay before
the TV responds.
Tip: If you cannot find your remote
control and want to switch the TV
on from standby, press CH +/- or
CH
on the TV.
Switch TV to standby
Press
on the remote control.
The remote control sensor on the TV
switches to red.
Switch off the TV
Press
on the TV.
The TV switches off.
Note: Though your TV consumes
very little energy when it is in
standby or switched off, it does use
some energy. If you are not going to
use the TV for an extended period
of time, disconnect the TV from the
mains plug.
EN
12
Automatic switch off
You can save energy with this TV's
energy efficiency settings, which are
enabled by default. If there is no
user interaction (such as pressing a
remote control button or a control
on the rear panel) for four hours, the
TV will automatically switch to
standby.
To disable automatic switch off
1. While you watch TV, press MENU
on the remote control.
2. Select [Timer], then press OK.
3. Select [Auto Standby] > [Off].
Adjust TV volume
Increase or decrease the TV volume
Press +/- on the remote control.
•
Press
+/- on the TV.
•
Mute or restore the TV volume
Press
on the remote control
•
to mute the volume.
Press
again to restore the
•
volume.
Adjust headphone volume
1. Connect a headphone to the TV.
2. Press MENU.
3. Select [Sound], then press OK.
4. Select [Headphone Volume],
then press
or
setting.
Switch TV channels
Press CH +/- or CH
•
the remote control or TV.
to adjust the
/
on
Advertisement
Table of Contents
