Reset To Default - Planet Networking & Communication VIP-254PT User Manual

Scheduling (Date)
Automatic Update
Firmware File Prefix
Next update time
Note:
If the Check new firmware field selected to Power On, the machine will chck the new
firmware accoeding the scheduling time/date and power on. If there are new firmware can
be upgraded, the machine won't carry firmware update out automatic. The machine will
show the [Found New s/w] message on LCD. Then press [Menu] button for entrying the
main menu and select the [7.Administrator -> 2. Upgrade System -> 1.Upgrade Now]
selection to carry out the upgrade firmware action.

Reset to Default

In Default Setting you can restore the IP Phone to factory default in this page. You can just click the
Restore button, then the IP Phone will restore to default and automatically restart again.
new firmware when power on and following the scheduling
date and time.
- Scheduling only: The machine will only follow the
scheduling date and time to check the new firmware.
The machine will check the new firmware between the time range
by random.
There are Notify only and Automatic ways to update.
- Notify only: If there are new firmware, the IP Phone will
send the "Be Be Be" sounds when pick up the handset to
prompt there are new firmware.
- Automatic: The device will carry firmware update out
automatically.
It will check the information of model name.
It will show the next check date and time.
42