Table of Contents
Advertisement
Dial Plan Settings
This page defines the Dial Plan Setting function. This function is when you input the phone number by
the keypad but you don't need to press "#". After time out the system will dial directly.
Field
Drop Prefix
Replace rule
+
Dial Now
Description
The rule of add or replace code. If setup as No, it will add the prefix
number prior to the identification number. If setup as Yes, it will
replace the identification number.
The prefix number. It only accept the numeral and the max length is 8.
The identification number. It can accept the numeral or symbol and
the max length is 40.
Symbol: It only accept the [+], [x]
+: It means as "or". For example, [123+456+334+5xx] even if
[123 or 456 or 334 or 5xx]
x: It is equal to 0~9. For example, [5xx] even if the number
begin 5.
If the dialing number are match with this field, it will dial out and need
not to press the "#" key to end the dialing. It accepts the numeral or
symbol, and the max length are 124.
Note: The starting number can't be the "0". For example, if the
number is "0xxxx", because the starting number is "0", so that the
23
Advertisement
Table of Contents
