JVC RX-7000RBK Service Manual page 115

CD player-changer
After pressing CD-DISC (with the remote control mode selector set
to "AUDIO/TV/VCR"), you can perform the following operations
on a CD player-changer:
PLAY:
Starts playing.
4 4
4 4 : 4
Returns to the beginning of the current (or previous)
track.
¢ ¢
¢ ¢ ¢ :
Skips to the beginning of the next track.
STOP: Stops playing.
PAUSE:
Pauses playing. To release it, press PLAY.
1 – 6, 7/P: Selects the number of a disc installed in a CD
player-changer.
After pressing CD (with the remote control mode selector set to
"AUDIO/TV/VCR"), you can perform the following operations on
the CD player-changer:
1 – 10, +10: Selects a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
Turntable
After pressing PHONO (with the remote control mode selector set to
"AUDIO/TV/VCR"), you can perform the following operations on a
turntable:
PLAY:
Starts playing.
STOP: Stops operations.
Cassette deck
After pressing TAPE/MD or TAPE/MD CONTROL (with the
remote control mode selector set to "AUDIO/TV/VCR"), you can
perform the following operations on a cassette deck:
PLAY: Starts playing.
1 : 1 1 1 1
Fast winds the tape from right to left.
¡ ¡ ¡ : ¡ ¡
Fast winds the tape from left to right.
STOP: Stops operations.
PAUSE:
Pauses playing. To release it, press PLAY.
¶ REC:
Press this button with the PLAY button to start
recording.
Press this button with the PAUSE button to enter
recording pause.
MD recorder
After pressing TAPE/MD or TAPE/MD CONTROL (with the
remote control mode selector set to "AUDIO/TV/VCR"), you can
perform the following operations on the MD recorder:
PLAY: Starts playing.
4:
Returns to the beginning of the current (or previous)
track.
¢:
Skips to the beginning of the next track.
STOP:
Stops playing.
PAUSE: Pauses playing. To release it, press PLAY.
¶ REC:
Press this button with the PLAY button to start
recording.
Press this button with the PAUSE button to enter
recording pause.
Note:
You can use either TAPE/MD button or the TAPE/MD CONTROL
button to activate the buttons listed above. If you press TAPE/MD, the
playing source also changes. On the other hand, if you press TAPE/
MD CONTROL, the playing source does not change.
46