Installation; Battery Runtime Charts; Shure Rechargeable Batteries - Shure ULXD6 User Manual

Batteries
Boundary and gooseneck base transmitters can be powered by Shure
SB900A batteries or two AA batteries (included).
The receiver front panel displays battery charge level in hours/minutes
for Shure batteries and in bars for AA batteries. For accurate monitoring,
set battery type in the IR Presets menu using the receiver front panel or
Wireless Workbench and perform an IR sync.
Menu path: IR PRESETS > GOOSENECK / BOUNDARY > BATTERY

Installation

1. Open the battery door.
2. Insert one Shure battery or two AA batteries. Align +/- ter-
minals on batteries as shown. For AA batteries, ro-
tate the rubber piece to hold batteries in place.
3. Close the battery door until it latches.
Use the small screw to the right of the batteries to secure the battery door
against tampering, if necessary.
1. Open the battery door.
2. Use a screwdriver to remove the screw to the right of the battery.
3. Close the battery door.
4. Insert and tighten the screw using a screwdriver.

Shure Rechargeable Batteries

The receiver home screen displays the number of hours and minutes
remaining for rechargeable batteries. If using a networked charging sta-
tion, Wireless Workbench displays battery information for all transmitters
docked on the charger.
Detailed information for rechargeable batteries is displayed in the receiver
BATTERY INFO menu.
HEALTH: Displays battery health as a percentage of the charge capacity
of a new battery.
CHARGE: Percentage of a full charge
CYCLES: Number of times the battery has been charged
TEMP: Battery temperature in Celsius and Fahrenheit
Charging
Charge transmitters with Shure rechargeable batteries in a networked
charging station.
Note: Turning off a networked charging station also turns off any docked
transmitters. Transmitters will resume charging when power is restored.
To provide power during operation, connect to an optional Shure USB
Charger (SBC10-USBA).

Battery Runtime Charts

For AA batteries, the battery icon on the receiver front panel indicates
battery charge.
The following tables display the approximate hours and minutes remaining
(hh:mm) for each battery indicator.
Alkaline
Battery Life 10 mW
8:00 to 5:55
5:55 to 3:50
3:50 to 1:45
1:45 to 0:45
0:45 to 0:15
0:15 to 0:00
NiMH
Battery Life 10 mW
10:00 to 7:15
7:15 to 4:30
4:30 to 1:45
1:45 to 0:45
0:45 to 0:15
0:15 to 0:00
Li-primary
Battery Life 10 mW
15:00 to 10:35
10:35 to 6:10
6:10 to 1:45
1:45 to 0:45
0:45 to 0:15
0:15 to 0:00
5