Subscribe to Our Youtube Channel
Related Manuals for Shure ULXD6
Summary of Contents for Shure ULXD6
- Page 1 ULXD6-8 Boundary and Gooseneck Base Transmitters Online user guide for ULXD6 and ULXD8 transmitters. Version: 7 (2019-G)
-
Page 2: Table Of Contents
Shure Incorporated Table of Contents Wireless Workbench and IR Sync ULXD6-8Boundary and Gooseneck Base Transmitters 3 Receiver Front Panel Using QLX-D with a Shure ULX-D System IMPORTANT SAFETY INSTRUCTIONS WARNING Mute/Active Button Quickstart Instructions High-Pass Filter General Description Transmitter RF Power... -
Page 3: Ulxd6-8Boundary And Gooseneck Base Transmitters
Shure Incorporated ULXD6-8 Boundary and Gooseneck Base Transmitters IMPORTANT SAFETY INSTRUCTIONS READ these instructions. KEEP these instructions. HEED all warnings. FOLLOW all instructions. DO NOT use this apparatus near water. CLEAN ONLY with dry cloth. DO NOT block any ventilation openings. Allow sufficient distances for adequate ventilation and install in accordance with the manufacturer’s instructions. -
Page 4: Warning
Do not short circuit; may cause burns or catch fire • Do not charge or use battery packs other than Shure rechargeable batteries • Dispose of battery packs properly. Check with local vendor for proper disposal of used battery packs. -
Page 5: Quickstart Instructions
Shure Incorporated Quickstart Instructions General Description ULX-D series boundary and gooseneck base transmitters add new designs to Shure's breakthrough ULX-D wireless line. Boundary and gooseneck base transmitters offer cable-free flexibility for corporate conference rooms, government facilities, ® educational institutions, A/V conferencing, and live sound reinforcement. Use Shure Wireless Workbench software and net... -
Page 6: Optional Accessories
4-bay networked docking station for gooseneck and boundary microphones SBC450 8-bay networked docking station for gooseneck and boundary microphones SBC850 8-Bay Shure Battery Charger SBC800 6' USB-A cable with wall plug for charging Wireless Transmitters SBC10-USB-A Shure Lithium-Ion Rechargeable Battery... - Page 7 Shure Incorporated 15" Gooseneck with Red Top LED (no cartridge) MX415RLP/N 15" Cardioid Dualflex Gooseneck Microphone MX415LPDF/C 15" Supercardioid Dualflex Gooseneck Microphone MX415LPDF/S 15" Dualflex Gooseneck with Red Top LED (no cartridge) MX415RLPDF/N 15" Cardioid Dualflex Gooseneck Microphone with Red Top LED MX415RLPDF/C 15"...
-
Page 8: Transmitter Controls And Connectors
Shure Incorporated Transmitter Controls and Connectors ① Power Button Press to power on; press and hold to power off. ② Mute/Active Button Four settings are available for the mute/active button: ◦ Toggle: Press to switch between active and mute states ◦... -
Page 9: Connecting Gooseneck Microphone To Ulxd8 Base
Shure Incorporated ④ Low-Battery LED ◦ Off = More than 30 minutes of battery life remain ◦ On (red) = Less than 30 minutes of battery life remain ◦ On (green) = Microphone docked on charging station ◦ On (amber) = Battery is missing or is not inserted correctly ⑤... -
Page 10: Batteries
Boundary and gooseneck base transmitters can be powered by Shure SB900A batteries or two AA batteries (included). The receiver front panel displays battery charge level in hours/minutes for Shure batteries and in bars for AA batteries. For ac curate monitoring, set battery type in the IR Presets menu using the receiver front panel or Wireless Workbench and perform an IR sync. -
Page 11: Shure Rechargeable Batteries
Note: Turning off a networked docking station also turns off any docked transmitters. Transmitters will resume charging when the power is restored. To provide power during operation, connect to an optional Shure USB power supply (SBC10-USB-A). The SBC10 power supply and the SBC450 and SBC850 docking stations fully charge Shure SB900A batteries in about three hours. -
Page 12: Battery Runtime Charts
Shure Incorporated Battery Runtime Charts For AA batteries, the battery icon on the receiver front panel indicates battery charge. The following tables display the approximate hours and minutes remaining (hh:mm) for each battery indicator. Alkaline Battery Life 10 mW 8:00 to 5:55... -
Page 13: Changing Transmitter Settings
Shure Incorporated Battery Life 10 mW 1:45 to 0:45 0:45 to 0:15 0:15 to 0:00 Changing Transmitter Settings Each transmitter has the following adjustable settings: • Mute button and mute LED behavior or brightness • High-pass filter • RF power •... -
Page 14: Wireless Workbench And Ir Sync
Note: If using a QLX-D receiver, you must use Wireless Workbench to make changes to transmitter settings. Using QLX-D with a Shure ULX-D System Transmitters and receivers from QLX-D and ULX-D component groups can be paired to form audio channels. -
Page 15: Mute/Active Button
To create an audio channel, manually set the receiver frequency to match the frequency of the transmitter. If using ULXD6 or ULXD8 transmitters with a QLXD receiver, you can only make changes to transmitter presets using Wire less Workbench. -
Page 16: Transmitter Rf Power
Shure Incorporated Transmitter RF Power Reference the following table for setting RF Power: RF Power Setting System Range Application 1 mW 33 m (100 ft.) For increased channel reuse at close distances 10 mW 100 m (330 ft.) Typical setups For hostile RF environments or longdistance ap... -
Page 17: Audio Signal Encryption
Shure Incorporated Audio Signal Encryption When encryption is enabled, the receiver generates a unique encryption key which is shared with the transmitter during an IR sync. Transmitters and receivers that share an encryption key form a protected audio path, preventing unauthorized access from other receivers. -
Page 18: Frequency Range
Shure Incorporated Frequency Range Band Frequency Range ( MHz ) Power ( mW )* 470 to 534 1/10/20 470 to 534 1/10/20 479 to 534 1/10 534 to 598 1/10/20 534 to 598 1/10/20 534 to 565 1/10 534 to 598 1/10 572 to 608;... -
Page 19: Specifications
Shure Incorporated Specifications ULXD6 Gain Adjustment Range 0 to 21 dB (in 3 dB steps) Battery Type Shure SB900/SB900A Rechargeable Li-Ion or AA batteries 1.5 V Battery Runtime @ 10 mW Shure SB900A Up to 9 hours 20 minutes AA batteries... - Page 20 See Frequency Range and Output Power table, varies by region Cardioid ULXD8 Gain Adjustment Range 0 to 21 dB (in 3 dB steps) Battery Type Shure SB900/SB900A Rechargeable Li-Ion or AA batteries 1.5 V Battery Runtime @ 10 mW Shure SB900A Up to 9 hours AA batteries...
-
Page 21: Important Product Information
Licensing of Shure wireless microphone equipment is the user’s responsibility, and licensability de pends on the user’s classification and application, and on the selected frequency. Shure strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies. -
Page 22: Certifications
Shure Incorporated Certifications Information to the user This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. - Page 23 Shure Incorporated Note: EMC conformance testing is based on the use of supplied and recommended cable types. The use of other cable types may degrade EMC perfor mance. The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance Authorized European representative: Shure Europe GmbH Headquarters Europe, Middle East & Africa Department: EMEA Approval Jakob-Dieffenbacher-Str. 12 75031 Eppingen, Germany Phone: +49-7262-92 49 0 Fax: +49-7262-92 49 11 4 Email: info@shure.de...
Need help?
Do you have a question about the ULXD6 and is the answer not in the manual?
Questions and answers