Saving Power For The Display - Docomo Premini-II User Manual

Saving Power for the Display

The display is automatically turned off to save battery power when
no operations are made for a certain period of time. You can set the
time before turning off the display and whether to flash the power
saver indicator.
1
From the Menu, select [Settings] → [Display] → [Power saver]
and press
Ｐｏｗｅｒ ｓａｖｅｒ
＜Ｓｔａｎｄ−ｂｙ＞
Ｓｅｔ
Ａｆｔｅｒ ０３ｍｉｎ
（０１ー３０）
＜Ｃａｌｌｉｎｇ＞
Ｓｅｔ
Ａｆｔｅｒ ０１ｍｉｎ
（０１ー３０）
2
Select [ON]/[OFF] of the Power saver mode at [Set].
3
Enter the time before turning off the display at [After].
Enter from 01 to 30 minutes.
4
Select [ON]/[OFF] of the power saver indicator at [Illum. blink]
under <Common Setting>.
5
Press
The Power saver is set.
●
If there is an incoming call, mail, etc., or the Clock alarm/Schedule alarm sounds
during the Power saver mode, the Power saver is canceled.
● The Power saver is not started during the Camera mode or while displaying images
as a slideshow.
●
It may take time to complete the charging when the Power saver mode is [OFF].
.
[<Stand-by>]:
Set power saving for the display other than during a call
(during stand-by or i-mode communication).
ＯN
[<Calling>]:
Set power saving for the display during a call.
[<Common Setting>]:
ＯN
Set whether to flash the power saver indicator in green
during the Power saver mode.
(cmplt).
89