Planet SGSW-24040R User Manual page 68

The page includes the following fields:
Object
•
Trap Mode
•
Trap Version
•
Trap Community
•
Trap Destination
Address
•
Trap Authentication
Failure
• Trap Inform Mode
• Trap Inform Timeout
(seconds)
• Trap Inform Retry
Times
Figure 4-3-3 SNMP Trap Configuration page screenshot
Description
Indicates the SNMP trap mode operation. Possible modes are:
• Enabled: Enable SNMP trap mode operation.
• Disabled: Disable SNMP trap mode operation.
Indicates the SNMP trap supported version. Possible versions are:
• SNMP v1: Set SNMP trap supported version 1.
• SNMP v2c: Set SNMP trap supported version 2c.
• SNMP v3: Set SNMP trap supported version 3.
Indicates the community access string when send SNMP trap packet. The
allowed string length is 0 to 255, and the allowed content is the ASCII characters
from 33 to 126.
Indicates the SNMP trap destination address.
Indicates the SNMP entity is permitted to generate authentication failure traps.
Possible modes are:
• Enabled: Enable SNMP trap authentication failure.
• Disabled: Disable SNMP trap authentication failure.
Indicates the SNMP trap inform mode operation. Possible modes are:
• Enabled: Enable SNMP trap inform mode operation.
• Disabled: Disable SNMP trap inform mode operation.
Indicates the SNMP trap inform timeout. The allowed range is 0 to 2147.
Indicates the SNMP trap inform retry times. The allowed range is 0 to 255.
User's Manual of WGSW-24040 / WGSW-24040R
68
SGSW-24040 / SGSW-24040R