Installing A Prru3902 On A Wall - Huawei DBS3900 Installation Manual

DBS3900 LampSite
Installation Guide
Figure 8-5 U-shaped metal plate specifications

8.3.2 Installing a pRRU3902 on a Wall

This section describes how to install a pRRU3902 on an indoor wall. If a wall indoors has
adequate load bearing capacity and installation space, it is good practice to install the
pRRU3902 on the wall. If the wall does not have adequate load bearing capacity, choose an
installation mode based on site requirements.
Context
This section describes only the wall-mounted installation in which mounting kits are directly
installed on the wall without auxiliary devices. The procedure for other wall-mounted
installation modes is similar.
Procedure
Step 1 Determine the position for installing the pRRU3902 based on the construction blueprint and
the clearance requirements.
Step 2 Place the mounting bracket in the installation position against the wall. Then, level the
mounting bracket and use a marker to mark four anchor points. See
Issue 06 (2015-10-30)
NOTICE
NOTE
For details about the clearance requirements, see
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8.1.3 Space Requirements.
Figure
8 Installing a pRRU3902
8-6.
98