Table of Contents
Advertisement
4.6.1 OPERATING MODE
The sub-menu allows determining the operating mode of the EFX-LE.
1 & 2
Press to move cursor.
3 & 4
When the cursor is at the Line 1 - n
When the cursor is at the Line 2
5/TAP & BANK
When the cursor is at the Line 1 - n
When the cursor is at the Line 2
STORE (MODE)
Storing any changes made while in this menu.
EXIT (MUTE/ )
Exiting to the Utility menu.
4.6.2 CLICK-LESS
The CLICK-LESS control is excellent for reducing this a popping noise. The sub-menu allows determining
the CLICK-LESS function.
1 & 2
Press to move cursor.
3 & 4
When the cursor is at the Line 1 - j
When the cursor is at the Line 2
5/TAP & BANK
When the cursor is at the Line 1 - j
STORE (MODE)
Storing any changes made while in this menu.
EXIT (MUTE/ )
Exiting to the Utility menu.
4.6.3 MUTE FUNCTION
This sub-menu allows determining whether the EFX-LE executes MUTE function, by pressing the M M UTE/
switch in the Preset mode.
1 & 2
Press to move cursor.
3 & 4
When the cursor is at the Line 1 - m
When the cursor is at the Line 2
5/TAP & BANK
When the cursor is at the Line 1 - m
STORE (MODE)
Storing any changes made while in this menu.
EXIT (MUTE/ )
Exiting to the Utility menu.
EFX - LE Audio Controller Owner's Manual
Line 2 - h to p indicate the operating mode (PRESET, SONG or SET01
to SET40).
: Moving a Utility menu.
: Scrolling a Operating Mode.
p
: Moving a Utility menu by 5.
: Scrolling a Operating Mode by 5.
p
Line 2 - h to p indicate the CLICK-LESS status.
OFF - You don't use the CLICK-LESS function.
BI CHANGE - The CLICK-LESS function is performed when input
buffer status is changed.
ALWAYS ON - The CLICK-LESS function is performed when a preset
or IA status is changed.
: Moving a Utility menu.
: Scrolling a Click-Less value.
p
: Moving a Utility menu by 5.
Line 2 - h to p indicate the
DISABLE - the M M UTE/
switch is used only for bank down.
ENABLE - Pressing the M M UTE/
Pressing & holding the M M UTE/
a bank number.
: Moving a Utility menu.
p
: Switching between
: Moving a Utility menu by 5.
DISALBE
or
ENABLE
.
switch will mute the guitar signal.
switch will be decreased
DISABLE
ENABLE
and
.
26
Advertisement
Table of Contents
