Manual Tuning And Set Up Preset For Dab Radio - MAJORITY Kite User Manual

Instructions Guide
DAB / DAB+ Radio
Press the 'Mode DAB/FM' button (Ref .1) . On first use, DAB Radio will
automatically start scanning all stations and save them .
To scan (if the unit hasn't automatically done so, or shows no
signal) press and hold the 'Info' button (Ref .5) and when the display
shows "FULL SCAN", press the 'Ok' button (Ref .7) .
The unit will start scanning up the frequency band and store all
stations that have a good signal . Please note: if you are not in a
good DAB signal area then you will not get a strong signal, if any .
The radio will automatically save all those stations that have a
strong signal . After searching has finished it will automatically play
the first station stored .
To select any of the stations that have been stored, use the 'Next'
(Ref .6) and 'Previous' (Ref .2) buttons to navigate through the
stations . To listen to a chosen station press the 'Ok' button (Ref .7) .
The radio will display station information when you press the 'Info'
button (Ref .5) . Press multiple times to view all information
available (See page 11) .
When you turn the radio on again after switching it off, it will
automatically tune to the same station (DAB or FM) that was last
selected .
4