Add/Edit Internet Connection - Huawei B222s User Manual

Click Network Setting > Broadband. The following screen opens.
Figure 17 Network Setting > Broadband
The following table describes the fields in this screen.
Table 4 Network Setting > Broadband
LABEL
CAPWAP Setting
CAPWAP Enable
CAPWAP AC Server
Apply
Cancel
Internet Setup
Name
APN
Encapsulation
NAT
Default Gateway
Modify

4.2.1 Add/Edit Internet Connection

Use this screen to configure a WAN connection. The screen varies depending on the interface type,
encapsulation, and WAN service type you select.
B222s User's Guide
DESCRIPTION
Select this to activate ??
Enter the IP address of the AC server.??
Click this to save the change in this section.
Click this to restore your previously saved settings in this section.
This is the service name of the connection.
This is the name of the LTE network to which the LTE Device will connect.
This shows the method of encapsulation used by this connection.
This shows whether NAT is activated or not for this connection. NAT is not
available when the connection uses the bridging service.
This shows whether the LTE Device uses the interface of this connection as the
system default gateway.
Click the Edit icon to configure the connection.
Click the Delete icon to delete this connection from the Device. A window
displays asking you to confirm that you want to delete the connection.
Chapter 4 Broadband
39