Huawei B222s User Manual page 17

Turn the Wireless LAN On or Off
Make sure the PWR/SYS LED is on (not blinking).
1
Press the WIRELESS On/Off button for one second and release it. The WLAN/WPS LED should
2
change from on to off or vice versa.
Activate WPS
Make sure the PWR/SYS LED is on (not blinking).
1
Press the WIRELESS On/Off button for more than five seconds and release it. Press the WPS button
2
on another WPS -enabled device within range of the LTE Device. The WLAN/WPS LED should flash
while the LTE Device sets up a WPS connection with the wireless device.
Note: You must activate WPS in the LTE Device and in another wireless device within two
minutes of each other. See
B222s User's Guide
Chapter 5 on page 62
Chapter 1 Introduction
for more information.
17