Huawei B222s User Manual page 32

Chapter 3 Connection Status and System Info
Table 3 System Info Screen (continued)
LABEL
Firmware Version
WAN Information
Mode
IP Address
LAN Information
IP Address
IP Subnet Mask
DHCP Server
WLAN Information
Channel
WPS Status
SSID (1~4) Information
SSID
Status
Security Mode
LTE Status
Status
Signal Strength
Service Provider
Frequency Band
Connection Uptime
ODU F/W Version
Module F/W Version
IMEI
IMSI
Interface Status
Interface
32
DESCRIPTION
This field displays the current version of the firmware inside the device. It also
shows the date the firmware version was created. Go to the Maintenance >
Firmware Upgrade screen to change it.
This is the method of encapsulation used by your ISP.
This field displays the current IP address of the LTE Device in the WAN.
This field displays the current IP address of the LTE Device in the LAN.
This field displays the current subnet mask in the LAN.
This field displays what DHCP services the LTE Device is providing to the LAN.
Choices are:
Server - The LTE Device is a DHCP server in the LAN. It assigns IP addresses to
other computers in the LAN.
None - The LTE Device is not providing any DHCP services to the LAN.
This is the channel number used by the LTE Device now.
Configured displays when a wireless client has connected to the LTE Device or
WPS is enabled and wireless or wireless security settings have been configured.
Unconfigured displays if WPS is disabled or wireless security settings have not
been configured.
This is the descriptive name used to identify the LTE Device in the wireless LAN.
This shows whether or not the SSID is enabled (on).
This displays the type of security the LTE Device is using in the wireless LAN.
This displays 4G LTE if there is an LTE connection, otherwise, it displays N/A.
This displays the strength of the LTE connection that the LTE Device has with the
base station which is also known as eNodeB or eNB.
This displays the service provider's name of the connected LTE network.
This displays LTE if there is an LTE connection.
This displays how long the LTE connection has been available since it was last
established successfully.
This displays the firmware version of the outdoor unit.
This displays the firmware version of LTE module.
This displays the LTE Device's International Mobile Equipment Identity number
(IMEI). An IMEI is a unique ID used to identify a mobile device.
This displays the International Mobile Subscriber Identity (IMSI) of the SIM card
inserted in the outdoor unit. An IMSI is a unique ID used to identify a mobile
subscriber in a mobile network.
This column displays each interface the LTE Device has.
B222s User's Guide