JVC UX-H100 Service Manual page 11

Hide thumbs Also See for UX-H100:

Table of Contents

Enlarged version

3.1.6 Removing the bottom base assembly

(See Fig.14 to 18)

• Prior to performing the following procedures, remove the rear

cover.

• Also remove the CD chassis assembly.

(1) Remove the two screws H retaining the front panel assem-

bly.

(2) Disengage the wire Q that fix the cassette deck wire.

(3) Disconnect the cassette head wire Z1 and the cassette mo-

tor wire Z2 of power supply from the connectors CN202,

CN203, and then disconnect the AUX IN connecting wire

Z3 from the connector TP1.

(4) Disengage the claws I on both sides of the front cabinet as-

sembly and then move the bottom base assembly toward

the back.

Caution:

You must ensure that the 30 pin connector

nected (See Fig.15).

CN201

is discon-

Fig.14

Fig.15

Fig.16

Front panel

Circuit board

Fig.17

Fig.18

(No.MB248)1-11

Table of Contents

Chapters

Table of Contents