JVC UX-H100 Service Manual page 10

3.1.5 Removing the CD mechanism
(See Fig.9 to 13)
• Prior to performing the following procedures, remove the rear
cover.
• Also remove the CD chassis assembly.
(1) Remove the three screws Y1 retaining the CD board.
(2) Disconnect the FFC cable Y2 from the connector CN701.
(3) Disconnect the two parallel wires Y3 from the connector.
(4) Remove the four screws Y4 with washers retaining the CD
mechanism.
Y1
1-10 (No.MB248)
Fig.9
Y2
Fig.10
Y3
Fig.11
Y3
Fig.12
Fig.13