Table of Contents
Advertisement
Step 2) WAN settings
In this section you have to select one of these types of connections that you will be using to
connect your XRT-E Router's WAN port to your ISP (see screen below).
?
Different ISP's require different methods of connecting to the Internet, please
check with your ISP as to the type of connection it requires.
Note:
Menu
2.1 Cable Modem
2.2 Fixed-IP xDSL
2.3 Dial-Up xDSL (PPPoE)
2.4 PPTP
2.5 L2TP
Click on one of the WAN types and then proceed to the manual's relevant sub-section (2.1, 2.2,
2.3, 2.4 or 2.5). Click on Back to return to the previous screen.
Description
Your ISP will automatically give you an IP address
Your ISP has given you an IP address already
Your ISP requires you to use a Point-to-Point Protocol over
Ethernet (PPPoE) connection.
Your ISP requires you to use a Point-to-Point Tunneling Protocol
(PPTP) connection.
Layer 2 Tunneling Protocol is a common connection method
used in xDSL connections.
11
Advertisement
Table of Contents
