Table of Contents
Advertisement
6: Click OK to confirm the setting. Your PC will now obtain an IP address automatically
from your Broadband Router's DHCP server.
?
Please make sure that XRT-401E's DHCP server is the only DHCP server
available on your LAN.
Note:
Once you've configured your PC to obtain an IP automatically, please proceed to Step 3.
2d) Windows NT
1: Click the Start button and select Settings, then click Control Panel. The Control Panel
window will appear.
2: Double-click Network icon. The Network window will appear. Select the Protocol tab from
the Network window.
3: Check if the TCP/IP Protocol is on your list of Network Protocols. If TCP/IP is not
installed, click the Add button to install it now. If TCP/IP is installed, go to step 5.
4: In the Select Network Protocol window, select the TCP/IP Protocol and click the Ok
button to start installing the TCP/IP protocol. You may need your Windows CD to
complete the installation.
5: After you install TCP/IP, go back to the Network window. Select TCP/IP from the list of
Network Protocols and then click the Properties button.
7
Advertisement
Table of Contents
