MOTO GUZZI California 1400 Instructions Manual page 128

Electrical system
Electrical specifications:
1 Resistance at -40 °C (-40 °F)
2 Resistance at -30 °C (-22 °F)
3 Resistance at -20 °C (-4 °F)
4 Resistance at -10 °C (14 °F)
5 Resistance at 0 °C (32 °F)
6 Resistance at +10 °C (50 °F)
7 Resistance at +20 °C (68 °F)
8 Resistance at +30 °C (86 °F)
9 Resistance at +40 °C (104 °F)
10 Resistance at +50 °C (122 °F)
11 Resistance at +60 °C (140 °F)
12 Resistance at +70 °C (158 °F)
13 Resistance at +80 °C (176 °F)
14 Resistance at +90 °C (194 °F)
15 Resistance at +100 °C (212 °F)
16 Resistance at +110 °C (230 °F)
17 Resistance at +120 °C (257 °F)
Pin-out:
•
PIN 1:0-5 V signal
•
PIN 2: Ground connection
CAUTION
BEFORE CARRYING OUT ANY TROUBLESHOOTING, CAREFULLY READ THE GENERAL TROU-
BLESHOOTING CONCEPTS FOR ELECTRICAL DEVICES AT THE BEGINNING OF THE CHECK
AND CONTROL SECTION IN THE ELECTRICAL SYSTEM CHAPTER.
DIAGNOSTICS INSTRUMENT: FUEL INJECTION SYSTEM
DIAGNOSTICS INSTRUMENT: PARAMETERS
Engine temperature
In case of recovery, this value is set by the control unit.
DIAGNOSTICS INSTRUMENT: ERRORS
engine temperature sensor P0115 - open circuit, shorted to positive / shorted to negative.
Error cause
•
If the circuit is open, shorted to positive: excessive voltage has been detected at PIN 12 of
the ENGINE connector.
•
If shorted to negative: equal voltage has been detected at PIN 12 of the ENGINE connector.
Troubleshooting
ELE SYS - 128
E
NGINE TEMPERATURE SENSOR RESISTANCE
Specification
California 1400
Desc./Quantity
100.950 kOhm
53.100 kOhm
29.120 kOhm
16.600 kOhm
9.750 kOhm
5.970 kOhm
3.750 kOhm
2.420 kOhm
1.600 kOhm
1.080 kOhm
0.750 kOhm
0.530 kOhm
0.380 kOhm
0.280 kOhm
0.204 kOhm
0.153 kOhm
0.102 kOhm