Yamaha YFM70RY Service Manual page 113

Locknut
42 Nm (4.2 m·kgf, 30 ft·lbf)
TIP
Always tighten the locknut against the adjusting
ring, then torque it to specification.
L LLL L LLL L L LLL L
2. Adjust:
• Rebound damping force
M MMM M MMM M M MMM M
a. Turn the adjusting screw "1" in direction "a" or
"b".
Direction "a"
Rebound damping force is increased.
Direction "b"
Rebound damping force is decreased.
Rebound damping adjusting posi-
tions
Minimum
20 click(s) out*
Standard
12 click(s) out*
Maximum
3 click(s) out*
* With the adjusting knob fully turned in
L LLL L L LLL L L LLL L
M MMM M M MMM M M MMM M
TIP
Make sure that the position indicator marks "c"
are aligned when the shock absorber is set to
the standard setting.
ECA1S3L003
NOTICE
Do not force the adjuster past the minimum
or maximum extent of adjustment. The ad-
juster may be damaged.
L LLL L LLL L
3. Adjust:
• Compression damping force (fast compres-
sion damping)
M MMM M MMM M
a. Turn the adjusting bolt "1" in direction "a" or
"b".
LLL
Direction "a"
Compression damping force is in-
creased.
Direction "b"
MMM
Compression damping force is de-
creased.
Compression damping setting (for
fast compression damping)
* With the adjusting screw fully turned in
TIP
Make sure that the position indicator marks "c"
are aligned when the shock absorber is set to
the standard setting.
3-30
L LLL L L LLL L L LLL L
M MMM M M MMM M M MMM M
Minimum
4 click(s) out*
Standard
2 click(s) out*
Maximum
0 click(s) out*
CHASSIS
L LLL L LLL
M MMM M MMM