Table of Contents
Advertisement
15. Click the Tunnel Setting tab, then select The tunnel endpoint is specified by this IP
address. Enter the WAN (Internet) IP address of VRT-401, as shown below.
16. Click the Authentication Methods tab, then click the "Edit" to see the screen like
the example below.
17. Select Use this string to protect the key exchange (preshared key), then enter your
preshared key in the field provided.
18. Click "OK" to save your changes and return to the Authentication Methods tab of
the Edit Rule Properties screen.
Figure 64: Tunnel Setting
Figure 65: Authentication Method
VPN
91
Advertisement
Table of Contents
