Planet VRT-401 User Manual page 41

Data - SingTel RAS Screen
Internet
RAS Plan
Physical Ad-
dress
IP Address
Network Mask
Default Gateway
DNS IP Address
DHCP Client
Buttons
Release/Renew
Button will
display EITHER
"Release"
OR
"Renew"
Refresh
The RAS Plan which is currently used.
The hardware address of this device, as seen by remote de-
vices on the Internet. (This is different to the hardware address
seen by devices on the local LAN.)
The IP Address of this device, as seen by Internet users. This
address is allocated by your ISP (Internet Service Provider).
The Network Mask associated with the IP Address above.
The IP Address of the remote Gateway or Router associated
with the IP Address above.
The IP Address of the Domain Name Server which is currently
used.
This will show "Enabled" or "Disabled", depending on whether
or not this device is functioning as a DHCP client.
If "Enabled" the "Remaining lease time" field indicates when
the IP Address allocated by the DHCP Server will expire. The
lease is automatically renewed on expiry; use the "Renew"
button if you wish to manually renew the lease immediately.
This button is only useful if the IP address shown above is
allocated automatically on connection. (Dynamic IP address). If
you have a Fixed (Static) IP address, this button has no effect.
If the ISP's DHCP Server has NOT allocated an IP Address
for VRT-401, this button will say "Renew". Clicking the
"Renew" button will attempt to re-establish the connection
and obtain an IP Address from the ISP's DHCP Server.
If an IP Address has been allocated to VRT-401 (by the
ISP's DHCP Server), this button will say "Release". Clicking
the "Release" button will break the connection and release
the IP Address.
Update the data shown on screen.
Operation and Status
37