Intel FALCON 8 Plus User Manual page 154

USER MANUAL
INTEL® FALCON™ 8+ UAS
Figure 4.2: Main Information Screens (Continued)
© 2017 Intel Corporation. All rights reserved
Motor Screen
The speed of each motor is displayed graphically
and indicated by a number. The numbers are not
rounds per minute, but rather a coefficient. The
screen can be used to analyze a motor defect
warning, see "Motor Failure Warning" on
page 127 for further details.
= Flight Mode. Same information as on the Main
G
Screen.
= Motors are right now not spinning
0
= Status line. Same information as on
OK
the Main Screen.
Battery Screen
Shows the actual state for each of the 2 batteries
inserted in the UAV
= Actual current of each battery in
Current
ampere
= Actual voltage of each battery in
Voltage
decivolt (dV)
= Charge state of each battery in percent
Charge
= Number of errors
Error
= Status line. This is the same informa-
OK
tion as on the Main Screen.
BMS Screen
Shows the actual state of the UAV.
= Remaining runtime of the UAV
Rem. Runt.:
in minutes
= Actual system voltage Charge: =
Sys. Volt.:
Charge state of the UAV in percent
= Number of batteries inserted in
# of Bat.:
the UAV
= Number of errors
Error:
= Status line. This is the same informa-
OK
tion as on the Main Screen.
154