6235/6235i/6236i (RM-60)
RF Description and Troubleshooting
UHF Synthesizer Test Points
Typical UHF LO Spectrum Outputs
When analyzing the specturm ouputs, first measure the purity of the UHF LO, then look
at the level offset from the carrier. Also check the VCO, PLL IC, loop filter and power
decoupling. The results in
a high impedance and high spectrum analyzer.
Page 54
Figure 51: UHF synthesizer layout
Figure 52
and
©2005 Nokia Corporation
Figure 53
may be difficult to accomplish without
Company Confidential
Issue 1 04/2005