Nokia Customer Care
GPS RF Schematic
The following schematic is for general reference only. See the Schematics chapter for a
detailed version.
GPS LNA
RF test input
RF filter 1
GPS Troubleshooting Setup
Use the following steps to set up GPS signal using Phoenix.
1. On the Phone Control dialog box, click the LOCAL button in the Phone State
area to put the mobile terminal into Local Mode. (See
example of the Phone Control dialog box.)
2. Click the Execute button.
Issue 1 04/2005
Figure 61: GPS RF schematic
©2005 Nokia Corporation
6235/6235i/6236i (RM-60)
RF Description and Troubleshooting
GPS TCXO
RF filter 2
Figure 7
Company Confidential
GPS RF Chip
on page
11
for an
Page 61