Introduction; Feature Highlights; Assemble The Aircraft - Quad H2O SARAH2O Pro User Manual

SARAH2O PRO User Manual
Product Profile

Introduction

The SARAH2O PRO is a brand new hexcopter capable of capturing 4K video and transmitting an HD
video signal (up to 3.5km) to multiple devices straight out of the box. Its sealed hull design allows you
to fly safely in the rain, snow and even land on water. The built-in camera has an integrated gimbal to
maximize stability and weight efficiency. It can capture an unobstructed vertical (90deg down) view
from its camera which allows you to accurately fly over objects of interest or film below the waterline.

Feature highlights

Camera and Gimbal: The DJI X3 camera/gimbal is capable of 4K video recording and 12 megapixel
photo capture. Reserved mounting space for ND filters for better exposure control. New quick-release
mount allows you to remove the camera with ease.
HD Video Downlink: Low latency, HD downlink powered by an enhanced version of the DJI Lightbridge
system.
Long Flight Times: High power, high efficiency propulsion system coupled with large capacity flight
batteries results in flight times exceeding its predecessors.
Flight Controller: The DJI N3 fight controller system provides a more reliable fight experience. Dual
IMU redundancy and a built-in 8GB Industry Black Box that automatically records every detail of the
aircrafts flight, enabling you to monitor flight data and fine-tune the aircrafts flight characteristics in
real-time.

Assemble the aircraft

Before you start, ensure you remove the packing foam from inside the SARAH2O PRO.
Unlock the folding arms
Open each of the four folding arms to their extended position, the arms will lock into place when fully
opened.
Installing the Quick Release Legs
Whilst working on the inside or underside of the aircraft we recommend placing the
HexH2O upside down, on a protective/cushioned surface.
1. Remove the legs from their shipping bag.
2. Flip the aircraft onto its back and slide each leg firmly into the leg mounts on the underside of the
aircraft.
3. To remove the legs, simply pull them out of the leg mounts.
© 2017 QuadH2O All Rights Reserved 4