Remote Controller Diagram - Quad H2O SARAH2O Pro User Manual

SARAH2O PRO User Manual

Remote controller diagram

[8] Power Button
Used to power on or power off the remote
controller.
[9] RTH LED
Circular LED around the RTH button displays RTH
status.
[10] Camera Settings Dial
Turn the dial to adjust camera settings. Only
functions when the remote controller is connected
to a device running the DJI GO app.
[11] Playback Button
Playback the captured images or videos.
[12] Shutter Button
Press to take a photo. If in burst mode, the set
number of photos will be taken with one press.
[13] Flight Mode Switch
Used to switch between P, A and F mode.
[14] Video Recording Button
Press to start recording video. Press again to stop
recording.
[15] Gimbal Dial
Use this dial to control the tilt of the gimbal.
[16] Mini-HDMI Port
Connect an HD compatible monitor to this port
when using a due video feed.
© 2017 QuadH2O All Rights Reserved
[1] Antennas
Relays aircraft control and video signal.
[2] Mobile Device Holder
Mounting place for your mobile/tablet device.
[3] Control Sticks
Controls aircraft orientation and altitude.
[4] Return Home (RTH) Button
Press and hold the button to initiate Return to
Home.
[5] Transformation Switch
Not in use.
[6] Battery Level LEDs
Displays the current battery level.
[7] Status LED
Displays the power status.
10