Camera Operation - Quad H2O SARAH2O Pro User Manual

Camera Operation

Use the Shutter and Record button on the remote controller or directly via the DJI GO app to
shoot images or video. For more information about how to use these functions, please refer to the
Lightbridge 2 user manual.
ND Filters
ND filters can be used to reduce over-exposure and "jello" effects.
Gimbal
Gimbal Profile
The 3-axis gimbal provides a steady platform for the attached camera, allowing you to capture
stabilized images and video. The gimbal can tilt the camera up to 120 degrees and rotate 360 degrees.
Use the gimbal dial on the remote controller to control pitch movement of the camera by default. Note
that the pan motion of the camera can only be controlled via the DJI GO app.
Using DJI GO app to control gimbal
Follow the steps below to use DJI GO app to control the gimbal orientation:
1. Launch DJI GO app, enter "Camera" page.
2. Tap and press on the screen until a blue circle is shown.
3. Slide to control the gimbal orientation within the "Camera" page as shown below.
© 2017 QuadH2O All Rights Reserved
SARAH2O PRO User Manual
15