Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Quad H2O SARAH2O Pro
- Page 1 SARA H 2 O USER MANUAL V1.3 08.2017...
-
Page 2: Legends
4. DJI Lightbridge 2 user manual 5. DJI Go app walk through video Watch the Quick Guide video Watch the SARAH2O PRO Quick Guide video tutorial via the link below to learn how to unpack and assemble the aircraft correctly. https://www.quadh2o.com/sarah2o-pro/downloads... -
Page 3: Table Of Contents
We recommend you watch the (unofficial) DJI GO app walk through guide via the link below. Please note this is a generic video guide and is not specific to the SARAH2O PRO, so some parts of the video will not be applicable to your aircraft. However it does provide an extensive overview of the DJI GO app features and functions, so beginners will find it helpful. -
Page 4: Introduction
Product Profile Introduction The SARAH2O PRO is a brand new hexcopter capable of capturing 4K video and transmitting an HD video signal (up to 3.5km) to multiple devices straight out of the box. Its sealed hull design allows you to fly safely in the rain, snow and even land on water. The built-in camera has an integrated gimbal to maximize stability and weight efficiency. - Page 5 SARAH2O PRO User Manual Installing the camera anti-reflection shroud Supplied with your aircraft is a anti-reflection shroud. The shroud is used to minimize any unwanted reflections from the camera housing onto the dome. 1. Remove the gimbal/camera from the supplied travel case and the shroud from the shipping bag.
- Page 6 SARAH2O PRO User Manual Do not over tighten the clips. You need to carry out a water test and adjust the clips on the rear hatch before you attempt to fly over water. Please refer to page 12 for instructions.
-
Page 7: N3 Flight Controller
SARAH2O PRO User Manual Leveling the motors In order to get the best results from your SARAH2O PRO we recommend you regularly check the motors to ensure they are level, using the supplied mini spirit level. 1. Remove the mini spirit level from the parts bag. -
Page 8: Dji Go App
GPS may result in being unable to land the aircraft safely. DJI GO app The SARAH2O PRO utilizes the DJI GO app. The app enables you to control all aspects of flight and the X3 camera/gimbal via your smart phone or tablet. The devise is compatible with both IOS and Android devices and can be downloaded via the Quadh2o website. -
Page 9: Preparing The Remote Controller
If you intend to fly in an area that will not provide an internet connection, be sure to first cache the map data of your intended flight zone. Please note that because of the component configuration used in the SARAH2O PRO the GO app may display a camera firmware update notice, even though the camera is using the latest firmware version. -
Page 10: Remote Controller Diagram
SARAH2O PRO User Manual Remote controller diagram [1] Antennas Relays aircraft control and video signal. [2] Mobile Device Holder Mounting place for your mobile/tablet device. [3] Control Sticks Controls aircraft orientation and altitude. [4] Return Home (RTH) Button Press and hold the button to initiate Return to Home. -
Page 11: Aircraft Diagram
SARAH2O PRO User Manual [17] Micro-USB Port For connecting the remote controller to your computer. [18] CAN Bus Port Reserved for future use. [19] USB Port Connect to mobile device to access all of the DJI GO app controls and features. -
Page 12: Installing The Dome
Installing dome The SARAH2O PRO has a perspex dome that is fitted to the front of the aircraft and is kept in place via eight quick release, quarter turn clips. A complimentary micro fiber cleaning cloth and protective bag is also provided. -
Page 13: Water Test
SARAH2O PRO User Manual Water test Before you fly over, or land on water, you will need to carry out a water test to ensure the dome and rear hatch are fitted and adjusted correctly. Please follow the procedure below in order to carry out a water test;... -
Page 14: Camera & Gimbal
Camera and gimbal Please note that because of the component configuration used in the SARAH2O PRO the GO app may display a camera firmware update notice, even though the camera is using the latest firmware version. This can be ignored and will not effect the camera operation. -
Page 15: Camera Operation
SARAH2O PRO User Manual Camera Operation Use the Shutter and Record button on the remote controller or directly via the DJI GO app to shoot images or video. For more information about how to use these functions, please refer to the Lightbridge 2 user manual. - Page 16 SARAH2O PRO User Manual Gimbal operation modes Three gimbal operation modes are available. Switch between the different operation modes on the Camera page of the DJI GO app. Note that your mobile device must be connected to the remote controller for changes to take effect. Refer to the table below for details;...
-
Page 17: Flight & Flight Enviroment
Ensure that all flights are carried out in a suitable location. You can then move to your first flight with the SARAH2O PRO - however we advise your first few flights are carried out in ‘Beginner Mode’ which can be set via the DJI GO app. Beginner Mode puts a Geofence around the aircrafts takeoff point. -
Page 18: Pre-Flight Checklist
SARAH2O PRO User Manual Pre flight checklist 1. Before your first flight ensure you have completed a full bench test and followed the instrucitons in this User Manual, including performing an Advanced IMU calibration and Compass calibration. 2. Remote controller, aircraft battery, and mobile/tablet device are fully charged. -
Page 19: Auto Take-Off And Auto Landing
SARAH2O PRO User Manual When to recalibrate 1. When compass data is abnormal, and the Aircraft Status indicator is blinking red and yellow. 2. When flying in a new location, or a location that is different to your last flight. -
Page 20: Starting/Stopping The Motors
SARAH2O PRO User Manual Starting/stopping the motors Starting motors The Combination Stick Command (CSC) listed below are used to start the motors instead of simply pushing the stick up. Ensure that you perform the CSC in one motion. Stopping motors When the aircraft has landed, push the throttle down and hold. -
Page 21: Aircraft Maintenance
SARAH2O PRO User Manual Suggestions and tips 1. Always ensure you work through your pre-flight checklist before each flight. 2. Ensure you regularly check the dome and rear hatch seal. 3. Ensure you always calibrate the compass when flying at a new location. - Page 22 SARAH2O PRO User Manual III. Checking the motors 1. Check the rotors to confirm that they have not become loose. 2. Detach the propellers and start the motors. Listen carefully. If there is any abnormal noise, please replace the motors. This may be a sign that the bearings have been worn out.
-
Page 23: General Flight Safety
This may indicate unusual vibration and the fan may need to be replaced. General flight safety IMPORTANT: The SARAH2O PRO aircraft is NOT a toy and is not suitable for children under the age of 18. Environmental considerations • Always fly at locations that are clear of building and other obstacles. -
Page 24: Disclaimer And Warning
SARAH2O PRO User Manual Operation • Stay away from the rotating propellers and motors. • Maintain line of sight of your aircraft at all times. • DO NOT perform the Combination Stick Command (CSC) when the aircraft is in midair. -
Page 25: Storage And Transportation
SARAH2O PRO User Manual By using this product, you hereby signify that you have read this disclaimer carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. You... -
Page 26: Flir Housing Usage
7” monitor. We recommend the Flir housing is removed from the SARAH2O PRO when not in use. Simply discount the supply cable from the JR socket and replace the blacking plug. Loosen the thumb knob and remove the Flir housing. - Page 27 SARAH2O PRO User Manual This content is subject to change Download the latest version from https://www.quadh2o.com/sarah2o-pro/downloads If you have any questions about this document, please contact QuadH2O by sending a message to support@QuadH2O.com © 2017 QuadH2O All Rights Reserved...