Status Indicator Light And Sounds - ECOVACS WINBOT9 W930 Instruction Manual

5. Status Indicator Light and Sounds

Indicator
Status Indicator Light flashes
GREEN
Status Indicator Light flashes
BLUE
Status Indicator Light glows
a continuous BLUE
Status Indicator Light flashes
RED
Status Indicator Light glows
a continuous RED
WINBOT emit beeps
16
EN
Back-Up Battery is low and is charging. WINBOT 9 will not clean
until the Back-Up Battery is properly charged.
WINBOT 9 is powered ON.
If WINBOT 9 is already on the window, please refer to section 6
Troubleshooting.
WINBOT 9 has successfully attached itself to the glass and is
ready to clean.
WINBOT 9 has a problem. Please refer to Section 6,
Troubleshooting, for details.
A. WINBOT 9 has been placed in Manual Override Mode. Please
refer to section 6, Troubleshooting, for details.
B. If WINBOT 9 is powered ON, the START/PAUSE Button is
pressed and the Status Indicator Light glows a continuous RED,
it is possible that WINBOT 9 has reached the end of its service
life. Please contact Customer Service.
WINBOT 9 beeps in following situations:
WINBOT 9 is powered ON.
WINBOT 9 finishes cleaning.
WINBOT 9 is successfully paired with its Remote Control.
WINBOT 9 has a problem.
Description