INTRODUCTION
Getting started with Sensus
Navigation
The navigation system is activated automatically
when the driver's door is opened.
Navigation On/Off
Navigation sub-view
Home button
Activating navigation
If the navigation system does not show a map on
Navigation
the center display, tap the
(1).
If the center display does not show the
Navigation
sub-view, press the Home button (2)
and then tap
Navigation
sub-view (1).
This will display a map showing the area around
the vehicle and the vehicle's current location (a
blue triangle).
6
WARNING
Observe the following.
•
Direct all your attention to the road and
make sure that all your concentration is
on driving.
•
Follow applicable traffic legislation and
drive with good judgment.
•
Due to weather conditions or time of year
affecting the road conditions, some rec-
ommendations may be less reliable.
Deactivating navigation
While the ignition is switched on, the navigation
system is always active in the background. It
switches off automatically when the ignition is
sub-view
switched off and the vehicle is locked.
NOTE
The system can be used even when the
engine is not running but will be switched off
automatically if the battery charge level is low.
Tap this symbol for a full-
screen map display.
Related information
•
Navigation displays and controls (p. 7)
Need help?
Do you have a question about the SENSUS NAVIGATION and is the answer not in the manual?