Table of Contents
Advertisement
ADE-3100 User Manual
packets will be forwarded to the destination PC.
Destination MAC
When the bridge filtering is enabled, enter the Destination MAC address, select
Block and click Add. Then all incoming WAN and LAN Ethernet packets matched
with this destination MAC address will be filtered out. If the Forward is selected,
then the packets will be forwarded to the destination PC.
Type
Enter the hexadecimal number for the Ethernet type field in Ethernet_II packets.
For example, 0800 is for IP protocol.
Figure 4-22: Bridge Filtering Screen
Save Settings
If any modification is made by administrator via web interface, the new settings
need to be saved into the flash and reboot ADE-3100 to make the changes effec-
tive.
Figure 4-24: Save Settings
28
Advertisement
Table of Contents
