Table of Contents
Advertisement
Admin
Privilege
ADSL Configuration
The ADSL Configuration page allows you to set the configuration for ADSL proto-
cols.
Trellis
Trellis Code. By default, it is always enabled.
Handshake Protocol
This is for the ADSL handshake protocol.
Wiring Selection
The wiring selection for the RJ-11.
Bit Swapping
Bit swapping enables an ADSL system to change the number of bits assigned to a
subcarrier, or change the transmit energy of a subcarrier without interrupting data
flow. (No need to configure this item unless it is necessary)
Figure 6-6: ADSL Configuration Screen
RIP Configuration
The RIP Configuration page allows the user to set the configuration for the system
wide configuration of RIP. The actual RIP configuration is in the RIP Per Interface
Configuration.
Figure 6-7: RIP System Wide Configuration Screen
RIP
41
Advertisement
Table of Contents
