Fixed Ip For Wan; Dynamic Ip For Wan - Planet ADE-3100 User Manual

Adsl modem router

Hide thumbs Also See for ADE-3100:

Table of Contents

ADE-3100 User Manual

Fixed IP for WAN

If your ISP has assigned static IP address, you may connect to the Internet by using

a fixed, or static address. To set up a Fixed IP for WAN, do the following steps as

an example.

Step 1

Enter the information of Static IP Address, Subnet Mask and Gateway provided

by ISP. Note: These parameters are required for building up connection. If one of

these information incorrect or unavailable, please contact your ISP for correct

information.

Figure 4-9: Fixed IP set-up screen

Step 2

Choose suitable packet encapsulation (1483 Bridged/ Routed LLC, 1483 Bridged/

Routed Mux, Classical IP over ATM). And Disable "Bridge" function.

Step 3

Click "submit" to commit modifications you've done, then click "Save Configura-

tion" to store settings. (Modifications will not take effects until next reboot.)

Step 3

Click on "NAT" tab on left panel, and enable the NAPT function in the option menu.

Step 4

Click "Save settings" on left panel to write configuration into machine, and reboot

to make settings effective.

If ISP provides a dynamic IP for Internet connection, following steps illustrate how

to enable the connection via ADE-3100.

Step 1

Choose suitable packet encapsulation (1483 Bridged/ Routed LLC, 1483 Bridged/

Routed Mux, Classical IP over ATM). And Disable "Bridge" function.

Step2

Check the DHCP option, and fill in the Host Name field (if required.) (This informa-

tion should be obtained from ISP. If there is no special demand for this, leave this

column blank.)

Table of Contents