Table of Contents
Advertisement
Chapter 2
Installation
This Chapter covers the physical installation of ADE-3100.
System Requirements
PC or TCP/IP compliant workstations
32 MB RAM
Ethernet Network Interface Controller (NIC) RJ45 Port
Internet Browser
Installation Procedure
Step 1
Choose an Installation Site
Select a suitable place on the network to install ADE-3100. Ensure ADE-3100 is
powered OFF.
Step 2
Connect LAN Cables
Use standard LAN cables to connect PCs to the LAN port on ADE-3100. Either
10BaseT or 100BaseT connections can be used.
Step 3
Connect WAN Cable
Connect one end of the RJ-11 phone cord to the LINE port on your ADSL modem.
Connect the other end of the RJ-11 phone cord to your wall phone jack.
Step 4
Power Up
Figure 2-1: Installation Diagram
2
5
Advertisement
Table of Contents
