Commercial Mode Overview; Setup Checklist; Pass-Through Mode - LG 22LX570M Commercial Mode Setup Manual

Commercial Mode Overview

This document describes how to set up LX570M Pro:Centric
commercial TV functionality is based on "ownership" of the Channel Map; that is, the Channel Map resides
in the TV's CPU, Protocol Translator Card (PTC), or the embedded b-LAN™ (EBL) module, or it resides
externally from the TV (i.e., in a device from the solution provider).
These TV models are capable of Free-To-Guest (FTG) Mode operation via the TV CPU. Alternatively, the
EBL module can be configured either for Pass-through Mode (default) or FTG Mode. When neither the CPU
nor EBL is in FTG Mode, these TV models also allow external control via the TV's MPI port.

Setup Checklist

Note: This document provides information specific to Commercial Mode operation. Refer to the Owner's
Manual for information on TV installation and hardware and cable connections.
Installation
__ Unpack TV and all accessories.
__ Install batteries in the Installer Remote.
__ Install TV on VESA mount or stand.
Note: It may be advisable to make all cable
connections before installing on VESA mount
or stand, as appropriate.
Hardware Connections
__ Install any additional hardware as
appropriate to your institution, LAN, etc.

Pass-through Mode

This mode allows you to configure individual TVs for Pro:Centric and/or FTG Mode via CPU operation
or create a Master TV Setup for cloning purposes. This mode also allows external control via the GAME
CONTROL/MPI port on the TV rear jack panel.
There are three methods for configuring individual TVs that are currently in Pass-through Mode: using
one of the two LG Setup Wizard options or using the Custom Master TV Setup procedure as described in
this document.
LG Setup Wizard Configuration
When the TV is in a factory default state, the LG Setup Wizard provides the following two configuration
options:
• The EZ-Manager Wizard provides automated or manual options for configuring Pro:Centric operation
and also provides the option to configure the TV using a USB memory device.
• The Express Script provides streamlined configuration of the TV for FTG Mode via CPU operation
(including pillow speaker setup) and also provides the option to configure the TV for Pro:Centric operation.
See "LG Setup Wizard" on pages 12 to 13 for further information.
Custom Master TV Setup
Unlike the guided process above, the Custom Master TV Setup procedure enables you to create a
customized Master TV Setup for cloning purposes for TVs that are to remain in Pass-through Mode. Use
the Installer Remote to configure Installer Menu items as required for TV operation and set up TV features
(Channel, Picture, Audio, etc.). See "Custom Master TV Setup" on pages 40 to 42 for detailed information.
6
®
TVs for Commercial Mode operation. LG
Cable Connections
__ Make all rear jack panel connections, as
appropriate.
Commercial Mode Setup
__ Complete appropriate procedures as described
in this document for Commercial Mode operation.
206-4281