AT&T TL96457 User Manual page 38

Bluetooth
Bluetooth setup
Your cell phone may require you to press a key to confirm the directory
f
download.
Your cell phone may require a passcode. In this case the screen displays
f
Check cellular. ENTER PASSCODE.. Enter the cell phone passcode into
the telephone base and press
If the selected device's directory has already been downloaded to
f
TL96457/TL96547 before, the handset displays the date of the last
download from your cell phone. The directory stored on the
TL96457/TL96547 for that cell phone will be erased and replaced with
the current cell phone directory. If you have edited the downloaded
entries, those changes will be lost. Press
screen displays Erasing directory....
If you already have four downloaded directories, the handset displays
f
Memory is full. Replace existing directory?. Press
replace an existing directory. Highlight the cell phone directory to be
replaced and press SELECT. The screen displays Replace Cell Phone X
directory? (Cell Phone X represents the device name of your cell phone).
Press YES to confirm.
5. When the downloading process completes, the telephone
base displays Download ended XXXX entries saved.
(XXXX represents the total number of the downloaded
entries). You hear a confirmation tone. Press OK
to the Bluetooth menu.
Notes:
Cell phone contacts can be downloaded from the phone memory only. You can transfer the contacts from your SIM
f
card to your cell phone memory first, and then download from your cell phone memory. For more information on how
to transfer contacts from your SIM card to your cell phone memory, see the user's manual of your cell phone.
When downloading the directory from your Bluetooth enabled cell phone, some data may not transfer. For example,
f
if you have home, mobile and work numbers for a particular contact, the three categories may not transfer to your
TL96457/TL96547.
SET
to save.
NEXT
to return
31
to start the download, the
YES
if you want to
Download ended
entries saved.
BACK
XXXX
OK