Wiring Diagram - Napoleon GDS25N-1 Installation And Operating Instructions Manual

7.0 WIRING DIAGRAM

This appliance must be electrically connected and grounded in accordance with local codes. In the absence
of local codes, use the current CSA C22.1 Canadian electrical code in Canada or the ANSI/NFPA national
electrical code in the United States.
DO NOT WIRE 110 VOLTS TO THE VALVE OR WALL SWITCH.
NOTE: JUMPER IS
PRESENT ONLY
IF APPLIANCE IS
EQUIPPED AND
OPERATED WITH
REMOTE CONTROL.
NOTE: This appliance is equipped with a three-prong (grounding) plug for protection against shock
hazard and should be connected into a properly grounded circuit. Do not cut or remove the grounding
prong from the plug.
WARNING
!
NIGHT
BLOWER
LIGHT
31
EN
W415-2207 / A / 08.28.17