Table of Contents
Advertisement
SYNC
On or Off
8.
This is to give installer the option of using internal synchronization or external
(usually the AC24V).
Since this device does NOT work with AC voltage, always keep this in Off
mode.
Zoom
1~23 Times
9.
To let user do zoom in and out. Usually this is replaced by hardware buttons
on control device
Digital Zoom
10.
To set up digital zoom function, Factory default setting is OFF.
Focus
11.
To let user make focus adjustment. Usually this is replaced by hardware
buttons on control device
Auto Focus
12.
To enable or disable the Auto-Focus function. Factory setting is Off.
In low light condition or when target to be focused is in low-contrast,
the auto-focus function may fail to deliver well focused image. In this case,
use manual focus controls on the controlling device
FOCUS-IN / FOCUS-OUT)
Position
13.
(The POSITION function is to let user to preset up to 64 groups of parameters like
zoom, focus...etc.)
H-gain
14.
The enhancement function is for changing sharpness of the object contour by
controlling horizontal gain.
V-gain
15.
The enhancement function is for changing sharpness of the object contour by
controlling vertical gain.
Motion
16.
Motion is the short word of "Motion Detection", a function used for detecting
moving article in specific zone. Such detection is executed by digital signal
processor in the camera.
To engage it, turn on the DETECTION with the ON/OFF selection.
.
User's manual
On or Off
On or Off
to obtain clear picture with visual judgment
(reserved function)
On / Off, Area, Level, Time, OSD
(normally labeled as
41
.
Advertisement
Table of Contents
