Table of Contents
Advertisement
Before installation starts, put mounting base and plastic housing together to
1.
make a base module
Locate the base module onto the place the camera is to be mounted, and fix
2.
the base on the surface completely with screws through the 3 holes on the
base
(be sure the cables are well located throughout the cable outlet)
Get the camera and plug it onto the base; watch for the direction of the
3.
connectors on camera and mounting base and be sure they are mated well.
Then rotate the camera body counter-clockwise until it is completely locked
Put the safety screw
4.
Integrate the mounting base and the
plastic housing as a module
Fit the camera into the module and
lock it in position
In case of dealing with a concrete surface:
a.
Mark the locations for screw through the holes on the base
b.
Make holes on the wall, then insert the supplied plastic plugs into the holes and
squeeze them in until they are flush with the wall surface.
c.
Mount the base on the desired place tightly with screws
.
User's manual
5.2 Surface mount
in locking position and screw it in
(anti-loss)
Mounting the module to the surface
Put the safety screw in place
.
18
Advertisement
Table of Contents
